Roland SP-555 用户手册
47
About CompactFlash
A sample assigned to a pad can be exported to a
CompactFlash card as an audio file.
CompactFlash card as an audio file.
1.
While holding down [RESAMPLE], turn on the power.
2.
Turn the CTRL 3 knob to select the format in which you
want to export the files.
want to export the files.
WAV:
WAV format
AiF:
AIFF format
3.
Press [SAMPLING] to confirm your choice of file type.
This selection is maintained even when you turn off the power.
4.
Make sure that [PATTERN SELECT] is extinguished. If it
is lit, press [PATTERN SELECT] to turn it off.
is lit, press [PATTERN SELECT] to turn it off.
5.
While holding down [CANCEL], press [RESAMPLE].
The display will indicate “FiL” (File Import/Export), and
[SAMPLING] and [RESAMPLE] will blink.
[SAMPLING] and [RESAMPLE] will blink.
6.
Press [RESAMPLE].
The display will indicate “EXP” (File Export),
[SAMPLING] will light, and [RESAMPLE] will go out.
[SAMPLING] will light, and [RESAMPLE] will go out.
7.
Select the export-source sample bank.
Press one of the BANK [A]–[F/J] buttons. The button you
pressed will light, and that bank (A–F) will be selected.
If you press BANK [C/G]–[F/J] once again, that button
will change from lit to blinking, and the corresponding
bank G–J will be selected.
Pads to which a sample is assigned will blink.
pressed will light, and that bank (A–F) will be selected.
If you press BANK [C/G]–[F/J] once again, that button
will change from lit to blinking, and the corresponding
bank G–J will be selected.
Pads to which a sample is assigned will blink.
If the selected bank contains no samples, the display will
indicate “EMP” (Empty).
indicate “EMP” (Empty).
8.
Select the export-source pad.
The pad you pressed will light, and the other pads will
stop blinking.
[SAMPLING] will also blink.
stop blinking.
[SAMPLING] will also blink.
You can select two or more pads if they are within the same
sample bank. To select a pad, press a pad that was blinking
in step 7, so it lights steadily.
sample bank. To select a pad, press a pad that was blinking
in step 7, so it lights steadily.
9.
Press [SAMPLING] so the button is lit.
During the export, the dot in the display will blink.
When the blinking dot has disappeared, the export
process is complete.
When the blinking dot has disappeared, the export
process is complete.
If there are identically named audio files in the root folder of
the CompactFlash card, they will be overwritten.
the CompactFlash card, they will be overwritten.
Exporting audio files
Naming of exported audio files
(WAV/AIFF)
(WAV/AIFF)
Audio files (WAV/AIFF) that have been exported to a
CompactFlash card will be located in the root folder
(top level) of the CompactFlash card.
When you use a computer or similar device to look at
the root folder of the CompactFlash card, the exported
audio files (WAV/AIFF) will be named as follows.
CompactFlash card will be located in the root folder
(top level) of the CompactFlash card.
When you use a computer or similar device to look at
the root folder of the CompactFlash card, the exported
audio files (WAV/AIFF) will be named as follows.
• If you’ve exported the sample of sample bank A
pad 1:
WAV: A_01.WAV
AIFF: A_01.AIF
WAV: A_01.WAV
AIFF: A_01.AIF
• If you’ve exported the samples of sample bank E
pads 6–16:
WAV: E_06.WAV–E_16.WAV
AIFF: E_06.AIF–E_16.AIF
WAV: E_06.WAV–E_16.WAV
AIFF: E_06.AIF–E_16.AIF
SP-555_e.book 47 ページ ２００７年６月２５日 月曜日 午前９時９分