Roland VS-100 用户手册

 

Panel Descriptions

 

fig.front01.eps

 

Analog audio signal input jacks with a microphone preamp.

You can use the [SENS] knob to adjust the input level of 

INPUT 1L/INPUT 2R. The level is displayed on the screen. (See 

These inputs correspond to input 1-2 in the USB audio 

interface function.

 

This input supports a 48 V phantom power supply and is 

compatible with condenser microphones that support a 

phantom power supply. If using a phantom-compatible 

microphone, turn on the phantom power supply switch. (See 

 

TRS balanced type line input terminal.

The INPUT 1L jack supports high-impedance input. If you 

connect a guitar, turn on the [Hi-Z] button.

You can also connect an unbalanced plug to this input.

 

This switch changes the input impedance. Set this switch as 

appropriate for the device that you’ve connected to the 

INPUT 1L LINE jack.

If you’ve connected a guitar or bass, press this switch inward 

to turn it on.

If nothing is connected, leave this switch in the off position.

The [Hi-Z] button affects only the LINE jack of INPUT 1L. It 

does not change the impedance of the MIC jack for INPUT 1L, 

nor of the LINE jack of INPUT 2R.

 

Insert an SD card for the WAVE recorder here. For more 

 

This output delivers the same signal as the MAIN output. To 

adjust the headphone volume, use the [VOLUME] knob.

 

Input/output component

 

Front panel

VS-100_r_e.book 14 ページ ２００９年３月２５日　水曜日　午前９時３４分