Roland VS-700 用户手册

 

CHANNEL STRIP Section

 

The rotary encoders work in conjunction with the [ASSIGN] button to allow tactile control over various track, bus and 

main parameters. All eight rotary encoders always control the same parameter type across different tracks/buses.

The rotary encoders control pan by default, but can be configured to control other channel parameters by pressing 

 

You can push on the top of the rotary encoder to reset the parameter to its default and/or unity setting (C for pan 

and 0 dB for gains).

When FLIP mode is enabled, the functions of the rotary encoders and faders are swapped, allowing you to use the 

faders for more detailed control of the currently assigned encoder function.

 

Hold the [COMMAND] modifier button and press/turn a rotary encoder.

The top row on the LCD display shows “

 

.” After 1/2 second, the parameter reverts to its previous value and the 

LCD display reverts to its previous display mode.

Use the [MUTE] button to mute/unmute the assigned track or bus. When the channel is muted, the [MUTE] button is 

lit.

When one or more channels are muted, the [Rude MUTE] button is lit as a convenient reminder. You can press the 

[Rude MUTE] button to quickly unmute all channels. For more information about Rude Mute, refer to 

 

 

Rotary Encoder (Knob)

Track Mute

 

Mute/unmute

Toggle input monitoring

Automated mute 
(when Automation Write is 
enabled)

 

Mute/unmute

(Reserved)

(Reserved)

 

Mute/unmute

(Reserved)

(Reserved)

VS-700_r_e.book 34 ページ ２００８年１１月２０日　木曜日　午後２時２８分