National Instruments 9201 用户手册
NI 9201/9221
24
ni.com
Shock and Vibration
To meet these specifications, you must panel mount the system. If
you are using the NI 9201/9221 with screw terminal, you also must
either affix ferrules to the ends of the terminal wires or use the
NI 9932 backshell kit to protect the connections.
you are using the NI 9201/9221 with screw terminal, you also must
either affix ferrules to the ends of the terminal wires or use the
NI 9932 backshell kit to protect the connections.
Operating vibration
Random (IEC 60068-2-64)......... 5 g
rms
, 10 to 500 Hz
Sinusoidal (IEC 60068-2-6) ....... 5 g, 10 to 500 Hz
Operating shock (IEC 60068-2-27).... 30 g, 11 ms half sine,
50 g, 3 ms half sine,
18 shocks at 6 orientations
18 shocks at 6 orientations
Electromagnetic Compatibility
This product is designed to meet the requirements of the following
standards of EMC for electrical equipment for measurement,
control, and laboratory use:
standards of EMC for electrical equipment for measurement,
control, and laboratory use:
•
EN 61326 EMC requirements; Industrial Immunity
•
EN 55011 Emissions; Group 1, Class A
•
CE, C-Tick, ICES, and FCC Part 15 Emissions; Class A