Roland LVS-800 用户手册
35
Switching Between NTSC and PAL
The LVS-800 can switch to NTSC or PAL at startup.
Switching to NTSC at Startup
At the DSK section, under [BACKGROUND], hold down the [A/B MIX] and [7/PC1] buttons and turn on the power.
Once set to NTSC, the setting persists in memory even after power off.
Once set to NTSC, the setting persists in memory even after power off.
fig.change-NTSC.eps
Switching to PAL at Startup
At the DSK section, under [FOREGROUND], hold down the [A/B MIX] and [8/PC2] buttons and turn on the power.
Once set to PAL, the setting persists in memory even after power off.
Once set to PAL, the setting persists in memory even after power off.
fig.change-PAL.eps
You can also use the menus to switch between NTSC and PAL. At the “Utility” menu, choose “NTSC/PAL,” then select “NTSC” or
“PAL.” After this operation, the setting requires some time to take effect.
“PAL.” After this operation, the setting requires some time to take effect.