Crown 1 用户手册
![Crown](https://files.manualsbrain.com/attachments/ad4fe37c83f8103796e2b688ca2207c0170833e9/common/fit/150/50/97448ffa3cf06c68e6fd163c5c4d945f12d2d93e0dfe71a4b3b4076cec46/brand_logo.gif)
Power Base Series Power Amplifiers
Page 19
5 Accessories
There are two accessories available at the time of this
printing: the
printing: the
MT-XLR and the MT-BB. Important: The
MT-XLR and MT-BB must be installed at a Crown
Factory Service Center or the Crown factory.
Factory Service Center or the Crown factory.
5.1 MT-XLR
The
MT-XLR is an accessory panel that provides two
standard 3-pin female XLR input connectors. The
MT-XLR accessory makes it easy to quickly change
connections in a system that uses standard XLR con-
nectors. It can also be used in systems that need to
daisy chain an input signal from one amplifier to an-
MT-XLR accessory makes it easy to quickly change
connections in a system that uses standard XLR con-
nectors. It can also be used in systems that need to
daisy chain an input signal from one amplifier to an-
other. Because the
MT-XLR connectors are wired in
parallel with the amplifier’s built in phone jack connec-
tors, an input signal fed to either input can be fed to
another amplifier from the unused connector for that
channel.
tors, an input signal fed to either input can be fed to
another amplifier from the unused connector for that
channel.
5.2 MT-BB
The
MT-BB is an accessory panel that provides barrier
strip input connectors. An
MT-BB accessory might be
desirable in applications requiring bare wire connec-
tions. It can also be used to daisy chain an input signal
from one amplifier to another just like the
tions. It can also be used to daisy chain an input signal
from one amplifier to another just like the
MT-XLR.
Fig. 5.1 The MT-XLR
MT-BB
–
+
–
+
C H - 2 I N P U T
C H - 1 I N P U T
Fig. 5.2 The MT-BB
MT-XLR
C H - 2 I N P U T
C H - 1 I N P U T
PUSH
PUSH
3
1
2
GND
THESE XLR INPUTS ARE CONNECTED IN PARALLEL WITH THE PHONE JACK INPUTS.