Roland CUBE-80X 用户手册

Panel Descriptions

You can switch to either of two delay 

types or the LOOPER function by 

positioning this knob.

When the knob is at WARM or CLEAR, 

this functions as a delay, and you can 

adjust the volume level of the delay by 

adjusting the knob’s position.

The indicator lights up when delay is on and goes out when it’s 

off. You can also switch this on and off using an optional 

footswitch pedal.

When the knob is positioned at LOOPER, you can use it to adjust 

the volume level of playback using the LOOPER function.

This indicator lights up when the LOOPER function is on. The 

indicator flashes when a footswitch pedal is used to switch off 

(mute) LOOPER.

Function and Delay at the Same Time” (p. 18).

When the knob is positioned at WARM or CLEAR, you can 

use this to adjust the delay time.

When the knob is positioned at LOOPER, this switch 

controls recording, playback, and overdubbing.

You can switch between use of two types of 

reverb by changing the position of the knob. 

You can adjust the intensity of the effect by 

varying the knob position.

The indicator lights up when reverb is on and 

goes out when the effect is off. You can also 

switch reverb on and off using an optional 

footswitch pedal.

Delay

This is a feedback delay with 
a warm analog-delay feel.
Turn the knob clockwise to 
increase the effect sound.

This is a delay with one to 
two repetitions.
Turn the knob clockwise to 
increase the effect sound.

Looper

This enables the loop-play 
mode.
You can vary the volume 
level for playback by 
adjusting the position of the 
knob. For more information, 
refer to “Using the LOOPER” 
(p. 17).

Adjusts the 
delay time

Pressing the switch twice sets 
a delay time equal to the 
interval between presses. You 
can set a time of up to 2,000 ms 
when the knob is at WARM or 
up to 1,000 ms when the knob 
is at CLEAR.

Holding down the TAP switch 
for one second or longer 
changes the delay time in a 
stepwise fashion from 30 to 90 
ms, according to the number of 
seconds you hold the switch 
depressed (four stages: 30 ms, 
50 ms, 70 ms, and 90 ms).

Starts and 
stops Looper 
recording 
and playback

Refer to “Using the LOOPER 
Function and Delay at the Same 
Time” (p. 18).

This is modeled on spring reverb.
It produces the distinctive 
reverberations of a spring. Turning the 
knob clockwise makes the effect 
progressively more intense.

This is a plate reverb.
This reverb features high-end sustain. 
Turning the knob clockwise makes the 
effect progressively more intense.

cube-80x.book  9 ページ  ２００８年１２月１２日　金曜日　午後６時７分