Roland 5100012850-01 用户手册

Mic Input Level (Mic)

Here’s how to adjust the level of the input from the microphone connected to the MIC IN jack on the rear panel.
Your voice will be distorted if the microphone input level is too high. Noise will be heard if the microphone input level is too low.
If your voice is distorted, or if there is too much noise, the VP-7 will have difficulty detecting the pitch, and it won’t be possible

to add harmonies cleanly.
To ensure that the harmonies are added as cleanly as possible, it’s important to adjust the microphone input level until it is as

high as you can get it without causing distortion to occur.

If the input from the microphone is at too high a level, acoustic feedback could be produced, or the sound might continue

sounding endlessly. Adjust the level of the microphone’s input by following the procedure below.

You should try to maintain a fixed distance between the microphone and your mouth.

Lights when the level of the signal from the microphone input is
too high.

Lights when the optimal signal level is being input via the micro-
phone input.

Lights when a signal is input via the microphone input.

Adjust the level so that the yellow indicator lights when you sing loudly.

Once you’ve set the microphone input level, you should normally leave it untouched. Use the [Volume] knob to raise or lower

the volume.