Denon Dj DN-X1700 用户手册
17
Get
ting Star
te
d
Connections
Basic Oper
ations
Specifi
cations
Tr
oubleshooting
Ef
fect
or F
or F
unction
Fader Start
Utility
USB
In the Utility mode, the preset data inside the device can be set.
1
Press the
UTILITY/–USB A/USB B
button. The utility
screen now appears.
2
Using the
EFFECT SELECT2
control, select the item,
and press the control to enter the selection.
When the selection is entered, the items and data
are switched using the hierarchy shown in the table
below.
To go back to the selection, press the
When the selection is entered, the items and data
are switched using the hierarchy shown in the table
below.
To go back to the selection, press the
BACK
button.
Operation then returns to the previous screen.
3
In the Utility mode, press the
UTILITY/–USB A/USB B
button to turn off the Utility mode.
The data which has been set is now stored in the
internal memory.
The data which has been set is now stored in the
internal memory.
Utility settings
Utility operations
Preset Items and Data
Category
Item
Parameter
Value
Default
Settings
1 Audio Setting
1 Master Setting
1 MONO
ON / OFF
OFF
2 Mic Setting
1 Ducking Level
-20dB to -40dB
-30dB
2 Mic EQ
1 Hi
1kHz to 4kHz
2kHz
2 Low
500Hz to 2kHz
1kHz
3 Default
-
3 Mic to Booth/Rec
ON / OFF
OFF
3 Isolator EQ
1 X.Over Hi
1kHz to 8kHz
2kHz
2 X.Over Low
100Hz to 800Hz
350Hz
3 Default
-
4 Cue Setting
1 Cue Mode *¹
CUE (Mix) / Solo
CUE (Mix)
5 Head Phones EQ
1 EQ Hi
-15dB to +15dB
0dB
2 EQ Low
-15dB to +15dB
0dB
3 Default
-
6 EFX Send/Rtn
1 Unity Level Select
-10dBV / 0dBV
-10dBV
7 USB Audio Setting
1 OutputSourceSelect
1 USB1 / USB2
Non, CH1, CH2, CH3, CH4,
Master, Rec, Mic
Master, Rec, Mic
Master
2 USB3 / USB4
Mic
3 USB5 / USB6
CH2
4 USB7 / USB8
CH3
2 Output Level VR
-20dB to +20dB
0dB
3 CH Input Level VR
-20dB to +20dB
-6dB
4 Mas Input Level VR
-20dB to +20dB
-6dB
5 Cue Input Level VR
-20dB to +20dB
-6dB
8 Digital I/O Setting
1 Digital Output VR
-20dB to +20dB
0dB
2 Digital Input Level
CH1
-2dB / -8dB / -14dB
-8dB
CH2
-2dB / -8dB / -14dB
-8dB
CH3
-2dB / -8dB / -14dB
-8dB
CH4
-2dB / -8dB / -14dB
-8dB
9 X-Fader Setting
1 A Side Cut Position *²
-2.0mm to +8.0mm
0.0mm
2 B Side Cut Position *²
-2.0mm to +8.0mm
0.0mm
10 Beat Breaker Setting
1 to 5
1
2 System Setting
1 Sampling Frequency
44.1KHz / 48KHz / 96KHz
96kHz
2 Display Brightness
1 to 40
27
3 Display Backlight
1 to 25
5
4 Display Contrast
1 to 16
15
5 PC/MAC*³
PC Mode / MAC Mode
PC Mode
6 Version(SYS)
XXXX
-
3 MIDI Setting
1 MIDI INPUT CH
1 to 16, OMNI
1
2 MIDI OUTPUT CH
1 to 16
1
3 MIDI Output Enable
1 5Pin
ON / OFF
ON
2 USB
ON / OFF
ON
4 MIDI CLK
1 5Pin
ON / OFF
ON
2 USB
ON / OFF
ON
4 Other Setting
1 Preset Export
Exit / Execute*
4
Exit
2 DN-X1700 Initialize
Exit / Execute*
5
Exit
5 Owner Setting
Display only
*1 When SOLO is selected as the CUE mode setting, only one of the two CUE buttons, whichever was pressed last, becomes operational.
*2 The cut-off position of the Crossfader can be adjusted separately for each side.
*3 When the unit is connected to a computer which runs Windows XP, Vista or a similar operating system, select the PC Mode.
When it is connected to a computer which runs Mac OSX or a similar operating system, select the MAC Mode.
*4 The settings for these Preset and the Owner mode settings can be stored on an external USB memory or other memory device.
*5 The settings for these Preset are set to the factory settings.
*2 The cut-off position of the Crossfader can be adjusted separately for each side.
*3 When the unit is connected to a computer which runs Windows XP, Vista or a similar operating system, select the PC Mode.
When it is connected to a computer which runs Mac OSX or a similar operating system, select the MAC Mode.
*4 The settings for these Preset and the Owner mode settings can be stored on an external USB memory or other memory device.
*5 The settings for these Preset are set to the factory settings.
Utility