Denon Dj DN-X1700 用户手册

5

q

These unbalanced stereo RCA terminals are 
used to connect devices such as a turntable 
(RIAA) with an MM (moving magnet) type of 
cartridge or CD/Media Player.

w

These are used to connect the digital output 
terminals of CD/Media Players and digital players.

e

96kHz)
Output from this RCA terminal is the digital 
output data. These signals are not affected by 
the master level adjustments. We recommend 
using an RCA cable designed for digital signals 
(75 ohms). (This can be purchased from an 
audio/video store.)

r

Connect these terminals to the Fader input 
terminals of the DN-S1200, DN-S3700 and etc 
using the 3.5 mm stereo mini cord.

t

This is connected to a computer to send and 
receive the USB MIDI, HID and USB audio 
signals.
The terminal supports USB 2.0 HighSpeed.

y

Only one mass storage device such as a USB 
memory or USB hard disk drive can be connected 
to this terminal.
(* A USB hub is not supported.)
The terminal supports USB 2.0 HighSpeed.

u

5-pin DIN connector output
This is connected to a MIDI-compatible device.

i

These are the recording output terminals.

o

  • This stereo pair of RCA terminals provides a 

unbalanced line level output.

 • 

Connect these terminals to the unbalanced 
analog input terminals on an amplifi er  or 
console.

Q0

  • These XLR type connectors provide a balanced 

line level output.

 • 

Connect these connectors to the balanced 
analog input connectors on an amplifi er  or 
console.

  • Pin layout: 1. GND, 2. Hot, 3. Cold
  • Applicable connector: Cannon XLR-3-32 or 

equivalent.

Q1

These TRS terminals are balanced line output 
terminals whose signal levels are adjusted using 
the BOOTH LEVEL control provided on the top 
panel.

Pin layout (TRS): 
Tip: Hot, Ring: Cold, Sleeve: GND

Q2

Q3 

  • These 1/4” TS mono terminals allow external 

processing of the program signal.

  • When connect monaural type effect processor, 

use Lch input and output.

SEND (output):
Connect this to the input terminal on the external 
effector.

RETURN (input):
Connect this to the output terminal on the 
external effector.

Q4

A microphone is connected to this balanced 
combo jack with XLR connector or with 1/4-inch 
TRS plug.

  • Pin layout: 1. GND, 2. Hot, 3. Cold
  • Applicable connector: Cannon XLR-3-32 or 

equivalent.

Q5

Accepts a balanced microphone with 1/4” 
terminals.

Pin layout (TRS): 
Tip: Hot, Ring: Cold, Sleeve: GND

Q6

This turns the unit’s power 

(h

) or 

(j

).

PUSHPUSH

t y

u

i

o

Q0

Q1

Q2

Q5

q

Q3

Q4

Q6

r

w

e