American Dj Trance Wheel 用户手册

American DJ

- www.americandj.com - Trance Wheel™ Instruction Manual Page 5

American DJ

- www.americandj.com - Trance Wheel™ Instruction Manual Page 6

Trance Wheel™

Control & Functions

Trance Wheel™

Control & Functions

1. Mirror - This is a highly reflective surface mirror specifically designed

to optimize and enhance beam output. Never use glass cleaner that

contains ammonia to clean the surface of the mirror (such as Windex).
2. Lens - This is a fully focusing high quality lens. Focus the lens

by manually turning the lens in a clockwise or counter-clockwise direc-

tion.
3. Filter - This unit comes with a built-in glass filter. This filter may be

removed at any time for a completely different effect. To remove the

filter unscrew the retaining thumb screw and gently pull the filter out.
4. Lamp Assembly - This assembly holds a ZB-EFR 15v/150w lamp.
5. Lamp Assembly Retaining Screws - These two screw hold the

lamp assembly in place.
6. Lamp Assembly Cover - This plate accesses the lamp socket

assembly. This cover is held securely in place by a single thumb screw

(7).
7. Lamp Cover Retaining Screw - This thumb screw holds the lamp

socket assembly cover (6) into place
8. Function Switch - This is a 3-way function switch. This unit can

be operated in three different mode all of which are controlled by this

switch.
9. Microphone - This microphone receives external low frequencies

to trigger the unit in Sound-Active and Master/Slave mode.
10. Fan - Cooling fan. For optimal performance keep this fan grill clean

at all times.
11. Fuse Holder - This housing stores the protective 3 amp fuse.

Always replace with the same exact fuse.
12. Power Cord - Connect only to a matching power outlet. Never use

this fixture is the ground prong has been removed or broken off.