Avaya S8300 用户手册

Before Going to the Customer Site

To install new firmware for the G700 processors and the media modules, you first need to move the new 
firmware files to a directory on the TFTP server. The installation program reads the new firmware files 
from this directory on the TFTP server.

Perform one of the two procedures in this section, depending on whether you have a bundled tar.gz file on 
a CD or wish to download individual firmware files from the Avaya Support website.

Your laptop (or the customer’s PC) must have WinZip or other file zipping software for 
this procedure.

Insert the G700 software CD into your laptop or PC CD-ROM drive.

Use Windows File Explorer or another file management program to access the files on the CD-
ROM drive.

Copy the tar.gz file (G700-11.3-0009.0.tar.gz or similar identifier) to the C:\tftp directory (or your 
alternate tftp location).

Use winZIP or another zipfile tool to unzip the file. You may need to unzip an additional tar.gz 
file embedded in the original file. You should continue to unzip tar.gz files until you see listed 
files with extensions as shown in the table "Firmware File Formats" below.

The sequence of links on the website may be somewhat different than described here.

Access the www.avaya.com/support website.

At the Avaya support site, click on 

 and then click on the 

following sequence:

> 

.

> 

> 

The system displays a list of firmware files.

Locate the file names that match the files listed in your planning documentation. The file names 
will approximate those listed in the following table: