Roland SPD-8 用户手册

O

ver

view

Basic Oper

ation

Adv

. 1 (K

it)

Adv

. 2 (P

hr

ase)

Adv

. 3 (
O

ther)

A

ppendix

Advanced Operation 3 (Other Settings)

Connecting Foot Switches

You can connect foot switches to the FOOT SW jack.

You can use a dedicated cable (PCS-31L: sold 
separately) to connect two foot switches 
(FS-5U: sold separately). 
The foot switch connected to the black plug is 
foot switch 1, and the one with the red plug is 
foot switch 2. 

Set the polarity switch of the FS-5U as shown below.

Alternatively, you can connect a single pedal switch (DP-2: sold separately) instead of the FS-5U. In this 

case, the DP-2 will operate as foot switch 1.

Making Settings

Ú

Ú

CONTROL (p . 16) .

The SYSTEM-CONTROL screen appears.

OFF

Specify the operation of foot switches 1 and 2. With the “OFF” setting, the foot switches will not work.

PAD CTRL

A popup menu will appear when you hold down the foot switch. Hold down the foot switch and hit a pad 
to operate the function that’s assigned to that pad. Sound will not be produced.

Set the tempo by striking the same pad four times or more successively 
at the desired interval (Tap Tempo).

Same operation as the [BYPASS] button of the FX Control screen (p. 41).

Recall the phrase assigned in “KIT OTHERS-PHRASE” (p. 34), and start the 
phrase loop in Play mode.

You can’t select this if no phrase has been assigned.

Jump to the Phrase Loop Standby screen (p. 44). 
The setup screen (p. 43) will be enabled while you hold down the pedal.

Select the previous kit (or the previous step if Kit Chain is on).

Select the next kit (or the next step if Kit Chain is on).

Same operation as the [ERASE] button (p. 47).

Same operation as the [MUTE] button (p. 46).

Same operation as the [BYPASS] button of the FX Control screen (p. 41).

Same operation as the [SET LOOP/NEXT] button (p. 43, p. 47).

Same operation as the [PLAY] button (p. 45).

Same operation as the [REC] button (p. 45).

You can stop the phrase by hitting the [PLAY]/[REC] pads simultaneously.

Select the previous part.

Select the next part.

PHRASE-LOOP CTRL

Execute the phrase loop operations STANDBY g SET LOOP

g

PLAY f g REC (p. 43).

KIT +

Select the next kit (or the next step if Kit Chain is on).

KIT -

Select the previous kit (or the previous step if Kit Chain is on).