Roland RT-7K 产品宣传页

下载
页码 2
Rhythm Coach
RM-2
¥ Special kit turns a standard 14" acoustic snare drum into a near-silent practice pad
¥ New 14" mesh head with V-Padª design for more natural response and rebound
¥ Rubber rim silencer suppresses rim shot noise
¥ Includes RT-5S Snare Trigger for triggering separate head/rim sounds 
¥ Expandable via optional RM-2 Rhythm Coach
(mounting bracket included) 
¥ Connect directly to a TD-Series brain or trigger MIDI
modules with optional TMC-6 Trigger MIDI Converter
Want to get more out of your
practice sessions? Then add the
RM-2 Rhythm Coach!
This combination sound
module/metronome takes the
monotony out of practice with 28
realistic drum sounds and 11
onboard rhythm training
exercises. The RM-2 mounts
easily to the PCK-1 with the
included bracket.
Turn Your Acoustic Snare Drum 
Into a Practice Pad.
With the PCK-1 Practice Conversion Kit, you can turn your 
acoustic snare drum into a near-silent practice pad. This 
special package includes a patented 14-inch mesh head, an 
acoustic trigger with separate head/rim capabilities, and a 
rim silencer so you can practice naturally without disturbing 
others. Add an optional RM-2 Rhythm Coach training module 
for even more effective practice.
Perfect timing
Too slow
Too fast
     Time Check : 
Time Check mode is designed to develop timing 
skills by learning to play exactly with the beat of the metronome. 
Beats played on the pad are measured against the timing of the 
metronome using a visual display for feedback.
    Rhythmic Notes :
 Rhythmic Notes is an excellent warm up exercise that also teaches note values. In 
this mode, the metronome plays through a series of beat divisions every two measures----starting with half 
notes, up to 16th-note triplets, and back down.
START
Individual rhythm practice can be monotonous and boring. But with the RM-2 's
Rhythm Coach function, you can practice using 11 different exercises designed to
improve timing, speed and endurance. With the RM-2, your practice sessions become
more effective and fun.
A Better Way to Practice
V-Kicks
KD-120/80
Kick Trigger Unit
KD-7
KD-120 kick available in
red or purple.
* Beater and connection cable
included.
* Kick drum pedal not included
and shown only for
photography purposes.
KD-80
V-Pads™
PD-120/100/80R/80
PD-9/7
Dual-Trigger Pads
PD-6
Single-Trigger Pad
PD-120 and PD-100 pads
available in red or purple.
PD-9
PD-120
Connect an optional
kick drum pedal for
practicing snare and
kick together.
*Note that the above examples represent only two of the 11 exercises available.
The Perfect Partner for the PCK-1.
Connect up to two additional pads
simultaneously.
Rear View
TRIGGER IN 1/2
PHONES/OUTPUT
MIX IN
Connect a CD/MD player here to play along.
Connect an amp, audio system or headphones here.
*You can play rim shots by connecting the RT-5S (dual-trigger)
to Trigger Input 1 and adjusting the RM-2's internal settings.
(Note that this disables Trigger Input 2.)
Enhance Your Practice by Adding These High-Quality Pads.
KD-7
¥ RT-5S Snare Trigger
¥ 14-inch Mesh Head
¥ Rubber Rim Silencer
¥ RM-2 Mounting Bracket 
¥ Connection Cable (0.2 m / 7-7/8 inches)
Accessory: Owner's Manual
*Guide for installation: 11 to 15 mm / 7/16 to 5/8 inch from the upper edge of the rim to the height of the head
*RM-2 and Snare Drum not included.
Practice Conversion Kit
PCK-1
Contents
*Please adjust the RM-2's internal settings and use an
optional monaural cable when connecting both the RT-5S
and KD-7 kick trigger. (Note that this disables rim shots.)
¥ TTrigger: 11 ¥ Connector:
Connector: Trigger output jack (1/4 inch phone type)
rigger output jack (1/4 inch phone type)
¥ Dimensions:
Dimensions: 52 (W) x 70 (D) x 48 (H) mm / 2-1/16 (W) x 2-13/16 (D)
52 (W) x 70 (D) x 48 (H) mm / 2-1/16 (W) x 2-13/16 (D)
x1-15/16 (H) inches
x1-15/16 (H) inches ¥ W
Weight: 105 g / 4 oz
105 g / 4 oz ¥ Accessories: Owner's
Owner's
Manual, Connection Cable
Manual, Connection Cable ¥ Guide for installation:
Guide for installation: 111 to 15 mm / 7/16
1 to 15 mm / 7/16
to 5/8 inch from the upper edge of the rim to the height of the head
to 5/8 inch from the upper edge of the rim to the height of the head
RT-3T
Tom Trigger
¥ TTriggers: 2 (Head, Rim)
2 (Head, Rim) ¥ Rim Level Knob:
Rim Level Knob: 11 ¥ Connector:
Connector: Trigger
output jack (stereo 1/4 inch phone type)
output jack (stereo 1/4 inch phone type) ¥ Dimensions:
Dimensions: 52 (W) x 100
52 (W) x 100
(D) x 53 (H) mm / 2-1/16 (W) x 3-15/16 (D) x 2-1/8 (H) inches 
(D) x 53 (H) mm / 2-1/16 (W) x 3-15/16 (D) x 2-1/8 (H) inches 
¥ W
Weight:
 
160 g / 6 oz
160 g / 6 oz ¥ Accessories: Owner's Manual, Connection
Owner's Manual, Connection
Cable ¥ Guide for installation:
Guide for installation: 111 to 15 mm / 7/16 to 5/8 inch from the
1 to 15 mm / 7/16 to 5/8 inch from the
upper edge of the rim to the height of the head
upper edge of the rim to the height of the head
RT-5S
Snare Trigger
¥ Triggers: 2 (Head, Rim) ¥ Rim Level Knob: 1 ¥ Connector: Trigger
output jack (stereo 1/4 inch phone type) ¥ Dimensions: 52 (W) x 100
(D) x 53 (H) mm / 2-1/16 (W) x 3-15/16 (D) x 2-1/8 (H) inches 
¥ Weight:
 
160 g / 6 oz ¥ Accessories: Owner's Manual, Connection
Cable ¥ Guide for installation: 11 to 15 mm / 7/16 to 5/8 inch from the
upper edge of the rim to the height of the head
¥ Trigger: 1 ¥ Connector: Trigger output jack (1/4 inch phone type)
¥ Dimensions: 52 (W) x 70 (D) x 48 (H) mm / 2-1/16 (W) x 2-13/16 (D)
x1-15/16 (H) inches ¥ Weight: 105 g / 4 oz ¥ Accessories: Owner's
Manual, Connection Cable ¥ Guide for installation: 11 to 15 mm / 7/16
to 5/8 inch from the upper edge of the rim to the height of the head
¥ TTrigger: 11 ¥ Connector:
Connector: Trigger output jack (1/4 inch phone type)
rigger output jack (1/4 inch phone type)
¥ Dimensions:
Dimensions: 52 (W) x 1
52 (W) x 110 (D) x 72 (H) mm / 2-1/16 (W) x 4-3/8 (D)
10 (D) x 72 (H) mm / 2-1/16 (W) x 4-3/8 (D)
x 2-7/8 (H) inches
x 2-7/8 (H) inches ¥ W
Weight: 175 g / 7 oz
175 g / 7 oz ¥ Accessories: Owner's
Owner's
Manual, Connection Cable, Hoop Guard
Manual, Connection Cable, Hoop Guard ¥ Guide for installation:
Guide for installation:
Height from rim upper edge to head: 36 mm / 1-7/16 inch, Rim
Height from rim upper edge to head: 36 mm / 1-7/16 inch, Rim
thickness: 13 mm / 9/16 inch
thickness: 13 mm / 9/16 inch
RT-7K
Kick Trigger
With Roland's RT-Series drum triggers, acoustic 
drummers can expand the power of their sets by 
tapping into the world of electronic drums. Best of all, 
these durable and ultra-sensitive triggers can be easily 
installed, and without altering the acoustic kit's sound.
¥ Superior sensor construction offers precise triggering while
maintaining natural acoustic sound
¥ RT-5S and -7K employ V-Padª sensor technology to capture the most
delicate nuances
¥ Rock-solid construction built to withstand aggressive playing
¥ RT-5S supports separate head/rim triggering and acoustic/mesh heads
¥ Works directly with Roland V-Drum
¨
modules and SPD-Series pads
¥ Lets you trigger MIDI modules when used with the Roland TMC-6 Trigger
MIDI Converter
* The performance of the RT-Series can be affected by elements such as the type of drum being used, the tuning and use of a 
mute. For best performance, refer to your sound module’s Owner’s Manual and set the trigger parameters accordingly.
* Be sure to mute the bass and snare drum (toms can also be muted if external vibrations are picked up).
* Use a ring mute or mute-type drum head to improve the performance of the RT-5S Snare Trigger.
¥ Trigger: 1 ¥ Connector: Trigger output jack (1/4 inch phone type)
¥ Dimensions: 52 (W) x 110 (D) x 72 (H) mm / 2-1/16 (W) x 4-3/8 (D)
x 2-7/8 (H) inches ¥ Weight: 175 g / 7 oz ¥ Accessories: Owner's
Manual, Connection Cable, Hoop Guard ¥ Guide for installation:
Height from rim upper edge to head: 36 mm / 1-7/16 inch, Rim
thickness: 13 mm / 9/16 inch
Supported Sound Modules: TD-10, TDW-1, TD-8, TD-6, RM-2, TMC-6, SPD-20, SPD-S, HPD-15
Acoustic Drum Set +
RT-7K / RT-5S / RT-3T
Trigger TD-/SPD-Series Modules
One of the easiest ways to expand the capabilities of your acoustic set is to connect the RT-Series
triggers to the Trigger Inputs of a TD-Series brain or SPD-Series module.
TD-10
SPD-S
or
Connect a Sampler or MIDI Sequencer
Acoustic Drum Set +
RT-7K / RT-5S / RT-3T
TMC-6
SP-505
or
Fantom-S
Want to add sampled sounds to your acoustic rig or record performances to a MIDI sequencer? Simply connect the RT-Series
triggers to Roland's TMC-6 Trigger MIDI Converter. No hassles, no fuss.
* "Phantom" is a registered trademark of and is licensed by Phantom Guitar Works.
Roland Corporation U.S.
5100 S.Eastern Avenue P.O BOX 910921
Los Angeles, CA 90091-0921
Phone: (323) 890.3700 Fax: (323) 890.3701
Visit us online at www.RolandUS.com
All specifications and appearances are subject to change without notice.
All trademarks are the property of their respective companies.
Printed in Japan JUN. '03 RAM-3685 B-4 PBL-UPR-K