Roland TD-9 用户手册
27
Creating a drum kit
Adjusting the volume and pan (stereo position) of individual
pads/pedals.
pads/pedals.
1. Press [KIT]-[F1] (INST).
The “INST” screen appears.
2. Press [F2] (MIXER).
3. Press [F1]–[F3] to select the item you want to edit.
If you pressed [F1] or [F2]
4-1. Hit the desired pad or use CURSOR [
] [
] to
select a pad.
4-2. Use CURSOR [
] [
] to select HEAD or RIM.
If you pressed [F3]
4. Use CURSOR [
] [
] to select a parameter.
5. Use [+/-] or [VALUE] to edit the value.
6. Press [EXIT] several times to return to the “DRUM
KIT” screen or just press [KIT].
Using the Mixer (MIXER)
Screen
Parameter
Value
Description
[F1] (VOLUME)
VOLUME
0–100
Volume of each pad
[F2] (PAN)
PAN
L15–CTR–R15
Pan position of each pad
[F3] (KITVOL)
Kit Volume
0–100
Volume of the entire drum kit
Pedal HH Volume
0–100
Volume of the hi-hat’s foot closed sound
XStick Volume
0–100
Volume of cross stick sound
XStick Threshold
0–127
Determines the velocity/dynamic at
which the cross-stick and open rim shot
sound will switch.
which the cross-stick and open rim shot
sound will switch.
Setting this to a high value makes it easier
to get cross stick sounds. When set to
“0,” playing cross stick will produce the
open rim shot sound.
* A very high value may cause the cross
to get cross stick sounds. When set to
“0,” playing cross stick will produce the
open rim shot sound.
* A very high value may cause the cross
stick to sound as when playing a rim
shot.
shot.
V
olume Levels
Hard
Soft
High
Low
Cross Stick
Sound
Rim Shot
Sound
Striking
force
Cross Stick Threshold (0–127)
TD-9_e.book 27 ページ ２００８年１月２３日 水曜日 午後４時２４分