Roland TD-9 用户手册
53
MIDI-related settings
MIDI settings for precise expressiveness in performances [F2] (CTRL)
Parameter
value
Description
PedalCC
OFF,
MODULATION(1),
FOOT(4),
GENERAL1(16)
MODULATION(1),
FOOT(4),
GENERAL1(16)
Specifies the MIDI control change message used to transmit/receive the depth to
which the hi-hat pedal is pressed.
which the hi-hat pedal is pressed.
HH
Compatibility
Compatibility
TD-9/TD-20,
EXTERNAL
EXTERNAL
This is a setting for the MIDI messages transmitted when you’re using an external MIDI
sound module to sound the notes played by the TD-9 and pads.
sound module to sound the notes played by the TD-9 and pads.
TD9/TD20:
Choose this setting if you’re using just the TD-9 and pads, or if you’re using a TD series
unit such as the TD-9 or TD-20 as your MIDI sound module.
MIDI messages appropriate for the TD series will be transmitted.
unit such as the TD-9 or TD-20 as your MIDI sound module.
MIDI messages appropriate for the TD series will be transmitted.
EXTERNAL:
Choose this setting if you’re using an external MIDI sound module other than the TD
series.
If you choose this setting, the display will indicate “HH Note# Border.”
series.
If you choose this setting, the display will indicate “HH Note# Border.”
HH
Note# Border
Note# Border
0–127
This setting lets you transmit MIDI messages that are appropriate for the MIDI sound
module you're using.
module you're using.
The note number transmitted when you strike the hi-hat will change depending on the
amount of pressure on the hi-hat pedal.
HH Border allows you to adjust the pedal position at which the note number switches
from the open hi-hat to the closed hi-hat.
As you monitor the note number transmitted by the TD-9 and the Control Change mes-
sage value, adjust the setting until the note number is switched at the pedal position
you want.
When using a VH-11 for the hi-hat, setting this value to around 80 allows you to trans-
mit the closed hi-hat note
number when the pedal is slightly above the fully depressed position.
amount of pressure on the hi-hat pedal.
HH Border allows you to adjust the pedal position at which the note number switches
from the open hi-hat to the closed hi-hat.
As you monitor the note number transmitted by the TD-9 and the Control Change mes-
sage value, adjust the setting until the note number is switched at the pedal position
you want.
When using a VH-11 for the hi-hat, setting this value to around 80 allows you to trans-
mit the closed hi-hat note
number when the pedal is slightly above the fully depressed position.
If you change the HH Border setting, the hi-hat of a pattern that was recorded
onto the internal sequencer by playing the pads may play back in a way that is
different from the actually recorded performance.
onto the internal sequencer by playing the pads may play back in a way that is
different from the actually recorded performance.
TD-9_e.book 53 ページ 2008年1月23日 水曜日 午後4時24分