Roland PAD-80 用户手册

Connecting to your Computer via USB

If you use a commercially available USB cable to connect the OCTAPAD’s rear panel USB (MIDI) connector to a USB connector of 

your computer, you’ll be able to do the following things using MIDI.

•  Trigger sounds in the computer by playing the OCTAPAD. 
•  Record into your sequencer software directly from the OCTAPAD. 
•  Use your sequencer software to play the OCTAPAD. 

USB cable (sold separately)

Use the rear panel cable hook 
to secure the USB cable as 
shown in the illustration at 
right. This will prevent USB 
communication errors from 
being caused by vibration when 
the OCTAPAD is struck.

For a thick USB cable

For a thin USB cable

Here you can download the original driver, and view installation instructions and operating requirements.

•  Only MIDI data can be transmitted or received via USB.
•  Power-on the OCTAPAD before starting the MIDI application on your computer. Do not turn the OCTAPAD’s power on or off 

while your MIDI application is running.

USB driver settings

Normally it will not be necessary to install a USB driver in your computer. However if you experience problems with the 

computer connection (if a malfunction occurs, or if the performance is poor), you may be able to solve the problem by 

downloading and installing Roland’s original driver as described below.

1.  In the OCTAPAD’s SYSTEM-MIDI screen, change the “USB Driver” (p . 65) setting to “VENDER .”
2.  Turn the OCTAPAD’s power off, and then on again .
3.  Download and install the original Roland driver .

For details on downloading and installing the original Roland driver, refer to the Roland website.