Roland SPD-30 用户手册

With a USB cable, you can 

connect the OCTAPAD to 

your computer for triggering 

sounds or recording MIDI 

information to your software 

sequencer (DAW).

With a USB memory (sold separately) 

you can backup and load your data.

Even when using your headphones, 

sound is still output from the 

OUTPUT jacks. 

For connection to your amplification or 

recording system.
If making a MONO connection, use the L/MONO 

jack.

For connecting an external audio 

device (MP3 player, computer, CD 

player etc). This audio signal will be 

sent to the OUTPUT and PHONES 

jacks.

Connect the included AC adaptor here.

Place the AC adaptor so the side with the indicator (see illustration) 
faces upwards and the side with textual information faces 

downwards. The indicator will light when you plug the AC adaptor 

into an AC outlet.

To prevent the inadvertent disruption of power to your unit 
(should the plug be pulled out accidentally), and to avoid applying 
undue stress to the AC adaptor jack, anchor the power cord using 
the cord hook, as shown in the illustration.

•  To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the 

power on all devices before making any connections.

•  When connection cables with resistors are used, the volume level of equipment connected to the inputs (MIX IN) 

may be low. If this happens, use connection cables that do not contain resistors.