Roland SPD-30 用户手册
60
Connecting Optional Pads or Pedals
The OCTAPAD lets you connect a hi-hat control pedal (FD-8), kick trigger or pads to the external trigger inputs. The illustration
below shows a typical set of connections, but there are many possibilities; like connecting two kick pedals to the
1/KICK input and the 2/SNARE input.
After connecting any external pads or pedals, you need to set the appropriate Pad Type as described below.
After connecting any external pads or pedals, you need to set the appropriate Pad Type as described below.
4/RIDE
3/HI-HAT
2/SNARE
1/KICK
HH CTRL
V-cymbal
(e.g., CY-12R/C)
(e.g., CY-12R/C)
Cymbal pad
(e.g., CY-5)
(e.g., CY-5)
V-pad
(e.g., entire PD series)
(e.g., entire PD series)
Kick trigger pad
(e.g., KD-8, KD-7)
(e.g., KD-8, KD-7)
Hi-hat control pedal
(FD-8, VH-11)
(FD-8, VH-11)
* To make connections, use the cable included with each pad .
External Pad Settings (PAD SETTING-EXTERNAL)
Here’s how to make settings for external pads.
1. Choose MENU
Ú
PAD
Ú
EXTERNAL (p . 16) .
The PAD SETTING-EXTERNAL screen appears.
Hit a pad to
select the pad whose
settings you want to
change.
Trigger meter, and
type of each pad.
Three sets of external pad settings can be stored (banks 1–3).
Turn [Knob 2] (BANK) to change banks.
Turn [Knob 2] (BANK) to change banks.
[Knob 1] (SEL) selects
a parameter.
Press [Button 3] (NAME) to go to a screen where you can
Turn [Knob 3] (–/+) to edit the value.
2. Hit an external pad (or step on a pedal) to select the pad whose settings you want to edit .
3. Turn [Knob 1] (SEL) to select a parameter .
4. Turn [Knob 3] (–/+) to edit the value .
3. Turn [Knob 1] (SEL) to select a parameter .
4. Turn [Knob 3] (–/+) to edit the value .
About banks
You can store three different external pad configurations. These are called Banks (banks 1–3). Turn [Knob 2] (BANK) to change
banks. Press [Button 3] (NAME) to access the screen where you can name the specific bank (p. 35).
External Pad and Pedal Settings