Roland SPD-30 用户手册

下载
页码 80
68
Specifications
SPD-30: OCTAPAD
Message
Meaning
Action
MIDI-related error messages
MIDI Offline .
The MIDI cable or USB cable was disconnected. Alternatively, 
communication with the external MIDI device has been interrupted for 
some reason.
Check whether the MIDI cable or USB cable could have been disconnected or 
broken.
MIDI Buffer Full .
A large amount of MIDI messages was received in a short time, and the 
OCTAPAD was unable to process them all.
Make sure that the external MIDI device is correctly connected. If this does not 
solve the problem, decrease the amount of MIDI messages being transmitted to 
the OCTAPAD.
Transmit buffer full .
An excessive amount of data was transmitted from the OCTAPAD, and 
could not be correctly output from MIDI OUT connector.
Decrease the amount of data being transmitted, for example by decreasing the 
recorded Phrase Loop data.
USB-related error messages
Can not access to the USB memory .
USB memory is not connected.
Connect USB memory to the USB memory connector.
Could not read this file .
The specified data was not found in the USB memory. Alternatively, the 
saved data is damaged.
Check the USB memory.
USB Memory Full .
There is insufficient free space on the USB memory.
Delete unneeded data.
Check USB memory .
The USB memory is not working correctly.
Check the USB memory.
Remove the USB device .
A USB device that the OCTAPAD cannot handle is connected, or a foreign 
object may have entered the USB memory connector, causing a short 
circuit.
Immediately disconnect the connection, and check that no foreign object has 
entered the USB memory connector.
PHRASE LOOP-related error messages
Phrase Memory full .
The Phrase Loop memory area is full.
Save your data to USB memory (p. 49), and create a new phrase.
System-related error messages
Device error .
There is a problem with the internal system.
Please contact your dealer.
Data memory was damaged .
There is a problem with internal memory.
A factory reset will be executed automatically.
Error Message List
Pads
Built-in Pads: 8
*  Four external trigger inputs are provided, allowing you 
to connect Pads .
Kits
50
Kit Chain
8 chains (20 steps per chain)
Instrument Parameters
Tuning
Muffling
Soft Attack
Tone Color
Pitch Sweep
Volume
Pan
Reverse
Effect Types
Ambience (7 Types)
Equalizer
Limiter
Multi Effect (30 Types)
Phrase Loop
Phrases: 50
Parts: 3
Tempo: 40–260
Resolution: 480 ticks per quarter note
Recording Method: Real-time
Maximum Note Storage: approx. 10,000 Notes
Display
160 x 160 dots Graphic Type LCD (Backlit LCD)
Pad Status Illumination x 8 (LED)
Connectors
PHONES Jack (Stereo 1/4 inch phone type)
OUTPUT Jacks (L (MONO), R) (1/4 inch phone type)
MIX IN Jack (Stereo 1/4 inch phone type)
EXTERNAL TRIGGER INPUT Jacks x 4
HH CTRL Jack
FOOT SW Jack (1/4 inch TRS phone type)
MIDI Connectors (IN, OUT)
USB MEMORY Connector (for USB Memory)
USB MIDI Connector (for USB MIDI)
Output Impedance
1.0 k ohms
Power Supply
AC Adaptor (DC 9 V)
Current Draw
600 mA
Dimensions
540.8 (W) x 272.4 (D) x 87.6 (H) mm
21-5/16 (W) x 10-3/4 (D) x 3-1/2 (H) inches
Weight
3.8 kg / 8 lbs 7 oz (excluding AC Adaptor)
Accessories
Owner’s Manual
AC Adaptor (PSB-1U)
Screws (M5 x 12 mm) x 4
Options
Pads (PD series, PDX series)
Cymbals (CY series)
Kick Triggers (KD series)
Hi-Hats (VH-11)
Hi-Hat Control Pedal (FD series)
Pad Stand (PDS-10)
All-Purpose Clamp (APC-33)
Acoustic Drum Trigger (RT-10K, RT-10S, RT-10T)
Pedal Switch (DP-2)
Foot Switch (FS-5U, FS-6)
Personal Drum Monitor: PM-10, PM-30
V-Drums Accessory Package: DAP-3
V-Drums Mat: TDM-10
USB memory
*  Use USB memory sold by Roland . We cannot guarantee 
operation if other products are used .
*  In the interest of product improvement, the specifications and/or appearance of this unit are 
subject to change without prior notice .