Gardner LCS IV 用户手册
17
Installation
Cell compartment (2) for:
The following cell types can be used in cell compartment (2).
•
Without cuvette adapter Z in the cuvette compartment (2),
you can insert 50 mm cuvettes.
you can insert 50 mm cuvettes.
•
With cuvette adapter Z: 10 mm square cuvettes.
Note: These cuvettes must be inserted with cuvette adapter Z.
Note: In the event of severe contamination, you can replace the cuvette
compartment (2) (see chapter
compartment (2) (see chapter
3.6.2
Installation of cuvette adapter Z
1.
Open the cuvette compartment.
2.
Insert cuvette adapter Z into the cuvette compartment (2) so
that the arrow on the cuvette adapter is pointing toward the
cuvette compartment (1) (
that the arrow on the cuvette adapter is pointing toward the
cuvette compartment (1) (
Note: The arrow on the cuvette adapter indicates the direction of the
light beam path.
light beam path.