Konica Minolta CM-2500d 用户手册

E-1

To ensure correct use of this instrument, read the following points carefully and adhere to them. After 
you have read this manual, keep it in a safe place where it can be referred to anytime a question arises.

(Failure to adhere to the following points may result 
in death or serious injury.)

Do not use the instrument in places 
where flammable or combustible gases 
(gasoline etc.) are present. Doing so 
may cause a fire.

Do not disassemble or modify the in-

strument or the AC adapter. Doing so 
may cause a fire or electric shock.
The instrument should not be operated if 
it is damaged or AC adapter is damaged, 

or if smoke or odd smells occur. Doing 

so may result in a fire. In such situations, 
turn the power OFF immediately, dis-

connect the AC adapter from the AC 

outlet (or remove the batteries if they are 
used) and contact the nearest KONICA 

MINOLTA SENSING-authorized serv-

ice facility.

Always use the AC adapter supplied as 
a standard accessory or the optional AC 
adapter, and connect it to an AC outlet 
of the rated voltage and frequency. If the 
AC adapters other than those specified 
by KONICA MINOLTA SENSING, 
this may result in damage to the unit, 
fire or electric shock
If the instrument will not be used for a 
long time, disconnect the AC adapter 
from the AC outlet. Accumulated dirt or 
water on the prongs of the AC adapter’s 
plug may cause a fire and should be re-
moved.

Do not insert or disconnect the AC 
adapter with wet hands. Doing so may 

cause electric shock.

Take special care not to allow liquid or 
metal objects to enter the instrument. 
Doing so may cause a fire or electric 
shock. Should liquid or metal objects 
enter the instrument, turn the power 
OFF immediately, disconnect the AC 
adapter from the AC outlet (or remove 
the batteries if they are used), and con-
tact the nearest KONICA MINOLTA 
SENSING-authorized service facility.

Do not dispose of batteries in fire, short 

their terminals, apply heat to them, or 
disassemble them. Also, do not recharge 

them (if they are not chargeable). Doing 

so may cause explosion or heat genera-
tion, resulting in fire or injury.

(Falling to adhere to the following points may result in 
injury or damage to the instrument or other property.)

Do not perform measurement which the 
measurement aperture directed towards 

your face. Doing so may damage them.

Do not place the instrument on an unsta-
ble or sloping surface. Doing so may re-

sult in its dropping or overturning, 

causing injury. Take care not to drop the 
instrument when carrying it.

Do not use batteries other than those 

specified by KONICA MINOLTA 

SENSING.
When installing batteries in the instru-

ment, make sure that they are correctly 

oriented according to the (+) and (–) 
marks. Failure to adhere to these in-

structions may cause batteries to ex-

plode or leakage of electrolyte, resulting 
in fire, injury or air pollution.

When using the AC adapter, make sure 
that the AC outlet is located near the in-

strument and that the AC adapter can be 

connected to and disconnected from the 
AC outlet easily.