Oregon Scientific BAR908HGA 用户手册

EN

16

MAXIMUM / MINIMUM MEMORY FOR UVI
To view the maximum and minimum memory for UVI:

1. Press 

SELECT to navigate to the Barometer Area. 

2. Press 

MODE to select the UV display.

3. Press  MEM to show maximum, minimum and  

current UVI readings.

4.  Press and hold MEM  for 2 seconds to clear the  

UVI memory.

NOTE The UV sensor must be activated before you try and 
set the additional features. 

The weather station can display the following information 
from any of the 5 remote sensors:

•  Current,  minimum,  and  maximum  temperatures   

and relative humidity percentages.

•  Comfort  level  indicator  and  trend  line  (rising,   

falling, or steady).

Data is collected and displayed approximately every  
60 seconds.

Press SELECT to navigate to the Temperature and Humidity 
Areas.
Temperature data is given at the top; Humidity is below.

Slide the °C  /  °F  switch  (inside  the  clock  battery 
compartment), to the setting you want. 

Press CHANNEL to switch between sensors 1-5.

•  To  auto-scan  between  sensors,  press  and  hold   

CHANNEL for 2 seconds. Each sensor’s data will  
be displayed for 3 seconds. 

•  To  end  auto-scan,  press  CHANNEL or MEM   

with the Temperature / Humidity Area selected.

NOTE If you select a sensor that collects only temperature 
data, the humidity will not be shown.

•  Press 

MEM repeatedly to view current, 

 

maximum and minimum records for the selected  
sensor. 

•  To  clear  the  records,  press  and  hold  MEM   

for  2  seconds.  A  beep  will  sound  to  confirm  that   
the memory has been cleared.

The trend lines are shown next to the temperature and 
humidity readings.