Davis Instruments 6152C 用户手册

下载
页码 56
Selecting Units of Measure
19
these steps cycles through the units available for barometric pressure: millibars, mil-
limeters, inches, and hectoPascals.
Wind Speed and Direction
Press WIND to select wind speed.
3. Wind speed may be displayed in miles per hour (m.p.h.), kilometers per 
hour (km/h), meters per second (m/s), and knots (knots). The 10 minute 
average wind speed will be displayed in the ticker.
A solid arrow within the compass rose indicates the current wind direction. Arrow 
caps indicate up to six different 10-minute dominant wind directions to provide a 
history of the dominant wind directions for the past hour.
4. Press WIND a second time to display the wind direction 
in degrees instead of the wind speed. When displayed in 
degrees, Due North displays as 360
º
 for consoles with 
firmware dated May 2005 or later. Previous releases 
marked Due North at 0
º
.
Each additional WIND key press toggles the display 
between wind speed and wind direction in degrees.
Note: 
If your anemometer arm is not pointing true north, you should recalibrate the wind 
direction reading on your console. See “Calibrate Wind Direction Reading” on 
page 25 for more information.
Outside and Inside Temperature
1. Press TEMP to select outside temperature. 
BAROMETER
  mb
BAROMETER
BAROMETER
mm
in
Displaying Units: Barometric Pressure Units: millibars (mb), millimeters (mm) and 
N
W
NE
SE
SW
Vertical Scale:                                       X10
WIND
RAIN            YEAR
in
TEMP OUT
HUM IN
HUM OUT
DAILY RAIN
in
TEMP IN
hPa
BAROMETER
STATION NO.1
F
F
F
MPH
Last  24 hrs
hr
Every 1 
S
E
NW
pm
TEMP IN
F
TEMP OUT
F
       HEAT INDEX
N
W
NE
SE
SW
WIND
MPH
E
S
NW
Wind Direction, Outside and Inside Temperature
WIND
360˚ N
˚
45˚ NE
˚
90˚ E
˚
135˚ SE
˚
180˚ S
˚
225˚ SW
˚
270˚ W
˚
315˚ NW
˚