La Crosse Technology 308-1414M 用户手册
Model: 308-1414M www.lacrossetechnology.com/support Page | 11
Mold Risk Indicator
Mold Risk is based on temperature and humidity. Monitor the mold risk for two separate
areas using the indoor weather station and multi-use remote sensor. Place the remote
sensor outdoors to monitor backyard weather conditions, or use it indoors to monitor
sensor outdoors to monitor backyard weather conditions, or use it indoors to monitor
high mold risk areas like in a crawl space or a basement.
View Mold Risk Indoor and Remote locations: From a normal display, press the
HEAT/DEW button three times and the Mold Risk will show next to the remote and
indoor humidity.
indoor humidity.
Temperature/Humidity Trend indicators
The indoor and outdoor temperature/humidity trend indicators will update every 30
minutes or less. These trends represent temperature changes over the past three hours.
Example: At 1:00pm, the arrow indicates the change in temperature since 10:00am. At
1:30pm, the arrow will indicate the temperature change since 10:30am.
Temperature has risen in the past 3 hours.
Humidity has risen in the past 3 hours.
Temperature has not changed in the past 3 hours.
Humidity has not changed in the past 3 hours.
Temperature has fallen in the past 3 hours.
Humidity has fallen in the past 3 hours.
Search for Remote Sensor
Hold the HEAT/DEW button to search for the remote sensor.
The strength signal icon will animate until the sensor signal is received or
for 3 minutes if no signal available.
MIN/MAX (View, Reset)
The Weather station provides the daily minimum and maximum temperatures
each day starting at midnight (12:00 AM). The Weather station automatically
resets the min/max temperatures at midnight (12:00 AM).
resets the min/max temperatures at midnight (12:00 AM).