La Crosse Technology Weather Radio 产品宣传页

 
LA CROSSE TECHNOLOGY QUICK SET-UP INSTRUCTIONS 
 
Please make sure that fresh batteries are installed properly in the receiver and the sensor. 

IMPORTANT!! Do not set the time or press any other buttons until the display has communicated with 
the outdoor sensor for at least 10 minutes. 

 
Use the “SET” button toggle through the menu options.  
Use the “INDOOR” button to change the menu options when they are flashing.  
 

1.  Press and hold the SET button until 12h is flashing. Use the INDOOR button to select either 12h 

or 24h time.  Press and release the SET button once. 

 

2.  The TIME is flashing.  Use the INDOOR button to adjust the hours and the OUTDOOR button to 

adjust the minutes.  Press and release the SET button once. 

3.  ** NOTE:  There is only a PM display on this unit which displays under the time.  If there is no 

PM display, the hours are set to AM** 

 

4.  The Fahrenheit is flashing.  Use the INDOOR button to select either Fahrenheit or Celsius. Press 

the SET button twice to exit the set-up.