Schumacher IP-95L 用户手册

The DC socket has a 15 amp automatic overload protection circuit 

breaker. Reset the breaker by pushing the breaker button located 

on the back of IP-95L.

110 Volt ac power source chart 

When the IP-95L is used with an inverter, it can operate appliances 

normally  powered  by  110V  AC.  (Inverter  not  included;  must  be 

purchased separately.)
*NOTE: Estimated time is conservatively reported. Actual time may 

vary. Times are based on IP-95L having a full charge. Requires 

the use of an inverter that is not included. Designed for up to a 125 

watt inverter.

using the Built-in swiVel light 

The built-in swivel light is located on the left side of the IP-95L. 

With a fully charged internal battery, the built-in light should provide 

18 to 26 hours of continuous useful light, depending on ambient 

conditions.

1.   Position the 

IP-95L

 on a flat, stable surface near the intended 

work area. 

2.   Pull tab up to remove light from storage. Turn light in direction 

needed.

3.   To turn light ON, push black button above light. 

4.   To turn light OFF, push the black button.

IMPORTANT: Turn OFF light before placing light in its storage 

space otherwise battery drain occurs.

5.   Charge 

IP-95L

 as soon as possible after using built-in light.

replacing the Built-in swiVel light BulB 

1.   Turn light OFF.

2.   Carefully unscrew the back plate of the lamp housing.

3.  Gently grasp the bulb and twist until notch in bulb lines up with 

retaining tab.

4.   Insert a replacement bulb of same type and rating, and twist 

clockwise one quarter-turn to screw in new bulb.

5.  Carefully screw on the back plate of the lamp housing.
6.   Test light by switching light ON and OFF.
7.   Replace lens cover if necessary.

 storage

The IP-95L can be stored in any position. The clamps are live and 

will produce arcing or sparking if they come in contact with each 

other. To prevent accidental arcing, always keep the clamps on the 

side ears when not using it to jump start a vehicle.
All  batteries  are  affected  by  temperature.  The  ideal  storage 

temperature is at 70 degrees Fahrenheit. Performance varies based 

on battery temperature conditions. 

limited warranty

Schumacher Electric Corporation warrants your unit to be free from defects in material and workmanship, excepting abuse or misuse, for a period of 

one year from the date of sale to the original user or consumer purchaser. If your unit fails or malfunctions within the first 30 days of the warranty, we 

will replace it with a new unit. If your unit malfunctions or fails within the 12 month warranty period because of a defect in material or workmanship, we 

will repair without charge.
The internal battery, excluding units with swollen batteries or melted battery terminals, carries a 90-day warranty from the date of purchase. Proof of 

purchase required. All battery replacements will be at the sole discretion of the manufacturer or his designated agents.
This warranty is in lieu of all other express warranties. The duration of any implied warranty, including but not limited to any implied warranty of merchantability 

or fitness for a particular purpose, made in respect to your unit is limited to the period of the express warranty set forth above.
For warranty service, return your product, with proof of purchase, to the factory or a designated agent: Schumacher Electric Corporation Warranty Service 

CONTAINS SEALED NON-SPILLABLE LEAD-ACID BATTERY. MUST 

BE DISPOSED OF PROPERLY.

WARNING: Possible explosion hazard. Contact with battery acid may 

cause severe burns and blindness. Keep out of reach of children.

Send Warranty Product Repairs to:  Schumacher Electric Corporation

1025 East Thompson, Hoopeston, IL 60942-0280

Call Customer Service if you have questions: 1-800-621-5485 (Hours: 7 a.m. – 4:30 p.m. CST)

801 Business Center Drive, Mount Prospect, IL  60056-2179