Fusion L702B 用户手册
3
GENERAL OPERATION
OUTPUT BATTERY CONNECTIONS
The Emperor L702B Pro has two sets of outputs on the front of the charger, channel
1 is on the left and channel 2 on the right. Each channel has two 4mm banana
sockets, a 7 cell balance port and a temperature sensor input.
1 is on the left and channel 2 on the right. Each channel has two 4mm banana
sockets, a 7 cell balance port and a temperature sensor input.
You will need an appropriate charge lead to suit the specific connector on your
battery. Connect this charge lead to the 4mm output sockets on the charger channel
you want to use, with the positive (+) lead connected to the red socket and the
negative (-) lead to the black socket.
battery. Connect this charge lead to the 4mm output sockets on the charger channel
you want to use, with the positive (+) lead connected to the red socket and the
negative (-) lead to the black socket.
Only connect the battery to the charge lead AFTER the charge lead has
been connected to the charger, as the connectors on the charge lead could
touch together and cause the battery to short circuit.
been connected to the charger, as the connectors on the charge lead could
touch together and cause the battery to short circuit.
When charging a Lithium pack, make sure that the balance lead is connected to the
charger. The charger has a ‘JST-EH’ type balance port, but also comes with balance
adaptor boards for JST-XH and Flight Power/Thunder Power. To use an adaptor
board, connect the supplied balance adaptor board lead to the charger and then
connect the board that works with your battery balance connector. Optional adaptor
boards for Polyquest & 4/2mm plug car packs are also available.
charger. The charger has a ‘JST-EH’ type balance port, but also comes with balance
adaptor boards for JST-XH and Flight Power/Thunder Power. To use an adaptor
board, connect the supplied balance adaptor board lead to the charger and then
connect the board that works with your battery balance connector. Optional adaptor
boards for Polyquest & 4/2mm plug car packs are also available.
If the main battery power leads ONLY are connected to the output banana sockets,
without connecting the balancing connector to the balancing port on the charger, the
charger will charge or discharge the connected Lithium pack without balancing it.
without connecting the balancing connector to the balancing port on the charger, the
charger will charge or discharge the connected Lithium pack without balancing it.
We always recommend balancing a Lithium pack, because some cells may
retain more capacity than others, so over time the pack can become
unbalanced. If an unbalanced pack is then used, some of the cells will
exceed their maximum voltage when charged and others their minimum
voltage when discharged, which causes damage to the cells. When a
Lithium cell is overcharged, it can cause damage and in extreme cases can
cause a fire.
retain more capacity than others, so over time the pack can become
unbalanced. If an unbalanced pack is then used, some of the cells will
exceed their maximum voltage when charged and others their minimum
voltage when discharged, which causes damage to the cells. When a
Lithium cell is overcharged, it can cause damage and in extreme cases can
cause a fire.