Kompernass KH 967 用户手册

下载
页码 10
7
e) Keep to the charging time!
The best protection against battery overheating is 
not to
exceed the proper charging time. If you wish to calculate
the time exactly, please refer to the technical data for
information about the charging current required. You can
take the values in the following table as a rough guide:
1.2V Ni-Cd battery 300 mAh
800 mAh
1800 mAh
Charging time:
2 hrs.
4 hrs.
10 hrs.
1.2V Ni-MH battery 2100 mAh
3500 mAh
4000 mAh
Charging time:
10 hrs.
18 hrs.
21 hrs.
9V Ni-Cd battery 100 mAh
Charging time:
11 hrs.
9V Ni-MH battery 200 mAh
Charging time:
22 hrs.
Warning: Batteries with a capacity of not more than 
300 mAh should not be charged for more than 2 hours, 
as they would become overcharged and overheat. 
Not for 9V single block batteries.
All charging slots and 9V connections have separate char-
ging current controls. You can therefore charge completely
different batteries at the same time – provided you observe
the 
different charging times, required for batteries with
different capacities.
f) Calculation of the Charging Time
Charging Time (h) = Battery Capacity (mAh) x 1.4
Charging Current of the Device (mA)
g) Charging time: Automatic cut-out
If you have loaded four batteries of the same type in the
1.2V charging slots, you can use the automatic cut-out
feature. With this feature, the appliance switches the 1.2V
charging slots over to trickle charge after the pre-selected
maximum charging time. 
This function is not available
for the 9V connections.
KH967_IB_AkkuChar_neu_UK.qxd  21.04.2006  10:38 Uhr  Seite 7