Xantrex Technology 10 用户手册

Operation

3–2

975-0251-01-01

The power switch is located on the front panel of the Freedom 10. This switch 
controls 

ON

/

OFF

 and 

RESET

 for the inverter. Expect a 3-second delay when the 

power switch is turned 

ON

 before the unit is activated.

If installed with the remote control panel, the power switch on the unit itself 
should be left in the 

OFF

 position.

If the unit is connected to external AC power, the power switch may be turned off, 
but the battery charger will continue to function. The internal transfer switch will 
continue to be engaged with the switch off and AC power will be available at the 
output of the unit. If AC power is removed, the unit will not come on as an 
inverter.

The remote control panel provides LED bar graphs that show system status, 
battery voltage, and current in both inverter and charge modes. For more 
information about this remote, refer to its owner’s manual.

Figure 3-1 Freedom 10 Power Switch

The power switch controls the inverter function. Placing the switch in the 

OFF

 position disables the inverter and connects mains to the output.

Figure 3-2 Remote Control Panel For 12 V Models