Roland EGX-350 用户手册
4-6 Cutter Installation Method 3 (Diamond Scraper)
69
Chapter 4 Engraving
3.
Make the settings for spindle speed and Z-axis control.
➊
Press
several times to display the screen shown at left.
Use
and
to select [OTHERS].
Press
.
➋
Use
to select “OFF.”
Press
to confirm.
➌
Press
.
Use
to select “ON.”
The machine automatically determines the Z-axis origin during cutting accord-
ing to the height of the workpiece.
ing to the height of the workpiece.
Press
to confirm.
The message shown at left is displayed for three seconds, and then the original
screen returns.
screen returns.
➍
Press
.
Use
and
to select the value.
This makes the setting for the distance the cutter rises from the Z-axis origin
point during cutting (the cut-out amount). When making this setting, take into
account the shape of the workpiece and the time required for movement.
point during cutting (the cut-out amount). When making this setting, take into
account the shape of the workpiece and the time required for movement.
Press
to confirm.
➎
Press
several times to return to the main screen.
The Z-axis coordinate display changes to “AUTO” and the spindle-speed dis-
play changes to “S OFF.”
play changes to “S OFF.”
4.
Install the diamond scraper and determine the amount of extension.
➊
Insert the diamond scraper into the cut-
ter holder.
ter holder.
Diamond scraper
Cutter holder