Schumacher 92035 用户手册

During the cutting process, the parts on the end of the torch are slowly consumed. To prevent 
premature consumption of some torch parts and to prevent damage to the torch itself, it is necessary 
to replace the consumable parts in a timely manner.  When the cutting arc seems to be weaker than 
normal or sputters, inspect all torch consumables for wear and damage and replace as needed. 

 

Standard Electrode (03) 

Long Electrode – optional 04) 

Air Diffuser (05) 

Standard Nozzle (07) 

Long Nozzle – optional (08) 

Nozzle Cap (10) 

Wire Standoff (11) 

Roller Standoff – optional (11) 

 

1.  Use clean, dry, oil-free compressed air only. 

2.  Establish and maintain a good electrical connection with the ground clamp to the material 

being cut. 

3.  Establish and maintain a consistent distance of about 1/16 inch between the material 

being cut and the torch nozzle. 

4.  Establish and maintain proper movement speed. The optimum torch movement speed 

for maximum consumable life is that which results in the main shower of sparks trailing 
approximately 5 degrees behind the main axis of the torch.  Moving the torch too fast 
and/or not cutting completely through the metal while continuing to move the torch will 
result in shorter consumable life. 

5.  Hold cutting starts to a minimum. Starts wear on the nozzle and electrode more than 

actual cutting. 

 

 

 

17