Lexmark S800 用户手册
In Mac OS X version 10.4 or earlier
a
From the Finder, choose Utilities.
b
Double-click Printer Setup Utility or Print Center.
c
From the Printer List dialog, choose the printer you want to use, and then click Add.
d
From the Printer Browser, select your printer, and then click Add.
3
A second print queue will be created. Remove the wireless queue if you do not want to switch back to accessing
the printer over a wireless connection.
the printer over a wireless connection.
Sharing a printer in a Windows environment
1
Prepare the computers to share the printer:
a
Make all computers printing to the printer accessible through Network Neighborhood by enabling File and
Print Sharing. See the Windows documentation for instructions on enabling File and Print Sharing.
Print Sharing. See the Windows documentation for instructions on enabling File and Print Sharing.
b
Install the printer software on all computers that will print to the printer.
2
Identify the printer:
a
On the computer that is attached to the printer, do one of the following:
1
Click
, or click Start and then click Run.
2
In the Start Search or Run box, type control printers.
3
Press Enter, or click OK.
b
Right-click the name of your printer.
c
Click Sharing or Printer Properties.
d
From the Sharing tab, select Share this printer or Shared as.
e
Assign a distinctive name, and then click OK.
3
Locate the printer from the remote computer:
Note: The remote computer is the one that is not attached to the printer.
a
Do one of the following:
1
Click
, or click Start and then click Run.
2
In the Start Search or Run box, type control printers.
3
Press Enter, or click OK.
b
Right-click the name of your printer.
c
Click Properties or Printer properties.
d
Click Ports > Add Port > Local Port > New Port.
e
Type the Universal Naming Convention (UNC) Port Name, which consists of the server name and the
distinctive printer name that was specified in step 2 on page 109. The name should be in the form \\server
\printer
distinctive printer name that was specified in step 2 on page 109. The name should be in the form \\server
\printer
.
f
Click OK.
g
Click Close on the Printer Ports dialog.
h
Make sure the new port is selected on the Ports tab, and then click Apply.
i
Click OK.
Networking
109