Lexmark C522 用户手册

下载
页码 145
Solving network printing problems
100
Troubleshooting
Solving network printing problems
Solving other problems
Solving color quality problems
This section helps answer some basic color-related questions and describes how some of the features provided in the 
Quality Menu
 in 
Settings 
can be used to solve typical color problems. For more information about the Quality Menu, 
including the menu selections, see the Menus and Messages Guide.
Note: Read Solving print quality problems, which provides solutions for common print quality problems, 
some of which may affect the color quality of the printed output.
Problem
Action
Job did not print or incorrect 
characters printed.
Verify that the MarkNet N8000 Series internal print server or external print server is set 
up properly and the network cable is connected.
For more details, see the drivers CD that shipped with the printer.
For Novell users:
Make sure the netware.drv file is dated October 24, 1994 or later.
Make sure the NT (no tabs) flag is included in the capture statement.
For Macintosh users:
The printer may need an optional internal print server to allow Macintosh connection.
Verify that the printer is set up correctly in Chooser.
Problem
Action
I need to get updated printer 
drivers or utilities.
See the drivers CD that came with the printer. It contains printer drivers and utilities.
Visit the Lexmark Web sitewww.lexmark.com, for the most current printer drivers or 
utilities.
I need to attach a serial cable to 
the printer.
If the printer is configured with a serial port, or an optional interface card is installed, 
seInstalling and removing options.
The multipurpose feeder door 
tilts down when the lower door is 
opened.
This is an intentional protective feature to prevent damage to the printer when the 
lower door is opened when the multipurpose feeder is in use.
To reposition the multipurpose feeder door:
Remove media from the multipurpose feeder.
Push the extensions back into place.
Close the multipurpose feeder.
Open the multipurpose feeder.
Grasp the multipurpose feeder extension, and pull it straight out until fully extended.
Load media into the multipurpose feeder.
I cannot find the printer escape 
codes.
See the Technical Reference available on the Lexmark Web site at 
www.lexmark.com.