Fujitsu DL7400 用户手册

Before you plug in the printer: 

9  Make sure that the printer power is switched off. The side 

marked “{” on the power switch should be depressed. 

9  Make sure that the power outlet is properly grounded. 

9  Make sure that you use the power cord shipped with the printer. 

This cord is designed to minimize radio frequency interference. 

 

To plug in the power cord: 

1.  Plug one end of the power cord into the power connector on the 

rear of the printer. 

2.  Plug the other end of the power cord into the power outlet. 

 

3.  Make sure that the power cord is securely connected. 

4.  Turn on the power by pressing the side marked “I” on the power 

switch. The POWER indicator on the printer control panel will 
light, the print head will move to its home position within a few 
seconds, and the ONLINE indicator will light (green).