Konica Minolta SU2 用户手册
10
Performing a Scan to HDD Operation
10-2
PageScope Light & Scanner Mode
G
After all pages of the document to be sent are scanned, touch [Scan
End], and then press the [Start] key. The transmission begins.
End], and then press the [Start] key. The transmission begins.
Tip
If the “URL Report” parameter was set to “ON”, a notification of the
URL where the image data is saved will be sent by e-mail. Select the
setting for the “URL Report” parameter when registering the recipient.
(Refer to page 10-2.)
If the “URL Report” parameter was set to “ON”, a notification of the
URL where the image data is saved will be sent by e-mail. Select the
setting for the “URL Report” parameter when registering the recipient.
(Refer to page 10-2.)
10.2
Registering a Recipient
Note
A mail box must have been created in advance using PageScope
Light.
A mail box must have been created in advance using PageScope
Light.
A maximum of 115 mail boxes can be created.
Creating a mail box (PageScope Light)
The following parameters can be set from the Create Mail Box page of
PageScope Light.
PageScope Light.
Mail Box Name:
Type in the name of the mail box.
(12 characters or less)
(12 characters or less)
Password:
Type in the password.
(64 characters or less)
(64 characters or less)
Retype Password:
Type in the password again.