Konica Minolta C20P 用户手册

„

Dry 

„

Sticky flaps

„

Tape seals, metal clasps, paper clips, fasteners, or peel-off strips for seal-
ing

„

Transparent windows

„

Too rough of a surface

„

Material that will melt, vaporize, offset, discolor, or emit dangerous fumes

„

Been presealed

A sheet of labels consists of a face sheet (the printing surface), adhesive, and 
a carrier sheet:

„

The face sheet must follow the plain paper specification.

„

The face sheet surface must cover the entire carrier sheet, and no adhe-
sive should come through on the surface.

You can print continuously with label sheets. However, this could affect the 
media feed, depending on the media quality and printing environment. If 
problems occur, stop the continuous printing and print one sheet at a time.
Try printing your data on a sheet of plain paper first to check placement. 
Check your application documentation for more information on printing labels.

„

Recommended for laser printers

„

Letter or A4 size (adhesive label stock)

„

Have labels that easily peel off or have parts of the label already removed

„

Have backing sheets that have peeled away or have exposed adhesive

Up to 20 label sheets, depending on their 
thickness

Not supported

Orientation Face down
Driver 
Media Type

Label

60-163 g/m² (16-43 lb bond)

Not supported