Konica Minolta C30P 用户手册
Finishing
128
Finishing
When the optional staple finisher is installed, job separation, offset and staple
printing can be performed. For the installation procedure, refer to “Staple Fin-
isher” on page 244. Settings can be specified for job separation, offset and
staple printing by selecting
printing can be performed. For the installation procedure, refer to “Staple Fin-
isher” on page 244. Settings can be specified for job separation, offset and
staple printing by selecting
JOB SEPARATION
or
FINISHING
in
PAPER
MENU
.
"
Use the following paper with job separation, offset and staple printing.
"
Paper is fed to the main output tray with job separation, offset and sta-
ple printing.
ple printing.
Job Separation Printing
When paper is fed to the main output tray, the pages are fed out shifted as
shown below.
shown below.
"
When paper is fed to the sub output tray, the pages are fed out
stacked on top of each other without begin shifted.
stacked on top of each other without begin shifted.
"
If staple printing is selected, the pages are stapled together before
being fed out.
being fed out.
Media Types
Plain paper, Recycled paper and Letterhead
(changes according to the paper thickness)
(changes according to the paper thickness)
Media Size
Width: 182 to 216 mm
Length: 257 to 355.6 mm
2
1
4
3
2
1
3
2
1
3
2
1