Konica Minolta 162 用户手册
6
Advanced copy operations
6-4
bizhub 162/210
4
Specify the desired copy settings.
For details, refer to “Making a basic copy” on page 4-3.
For details, refer to “Making a basic copy” on page 4-3.
?
Do you know the copy order for the 4in1 copy function?
% The copy order can be set to one
of the two shown at the right. For
details, refer to “Specifying 4IN1
COPY ORDER” on page 7-40.
The default setting is PATTERN1.
details, refer to “Specifying 4IN1
COPY ORDER” on page 7-40.
The default setting is PATTERN1.
5
Using the 10-key pad, enter the
number of copies to be made.
number of copies to be made.
–
If multiple copies are to be print-
ed, press the [Finishing] key until
ed, press the [Finishing] key until
Sort
is selected.
6
Place the next document page on
the original glass, and then press the
[Start] key.
the original glass, and then press the
[Start] key.
–
Repeat this step for all pages of
the document.
the document.
–
The number of document pages
that have been scanned is displayed.
that have been scanned is displayed.
7
After all document pages have been scanned, press the [Start] key.
2
Note
If the document is placed on the original glass and 2in1 or 4in1 copies are
being produced, the copy job cannot be interrupted.
If the document is placed on the original glass and 2in1 or 4in1 copies are
being produced, the copy job cannot be interrupted.
1 3
2 4
1 2
3 4
PATTERN1
PATTERN2