Konica Minolta 162 用户手册
3
Before making copies
3-42
bizhub 162/210
To copy with a manually selected paper size
1
Position the documents.
For details refer to “Loading the document” on page 4-10.
For details refer to “Loading the document” on page 4-10.
2
Press the [Paper] key, and then se-
lect the desired paper size.
lect the desired paper size.
The selected paper size appears in
the bottom line of the screen.
the bottom line of the screen.
3
Specify the desired copy settings.
For details, refer to “Making a basic
copy” on page 4-3.
For details, refer to “Making a basic
copy” on page 4-3.
4
Using the 10-key pad, enter the number of copies to be made.
5
Press the [Start] key.
This will start the copy cycle.
To load special paper into the 1st tray
If special paper, such as OHP transparencies, postcards or cards are loaded
into the 1st tray, first set the tray1 paper function in the paper source setup
menu. For details, refer to “Specifying TRAY1 PAPER” on page 7-14.
into the 1st tray, first set the tray1 paper function in the paper source setup
menu. For details, refer to “Specifying TRAY1 PAPER” on page 7-14.
Depending on the paper type set for the tray1 paper function, the screen
changes as shown below.
changes as shown below.
Cards
OHP transparencies
Postcards or envelopes