Konica Minolta C450 用户手册
Transmission applications
7
C450
7-31
3
Press [F-Code TX].
4
Enter box no. of the receiving station in the box of SUB address. Press
[Password] and then enter the password with keypad if necessary.
[Password] and then enter the password with keypad if necessary.
–
SUB address and password can be numbers of up to 20 digits.
–
When communicating with the FK-502, input 9 digits or less for the
box no. and 8 digits or less for the password. The required digits
are different depending on the device.
box no. and 8 digits or less for the password. The required digits
are different depending on the device.
–
Numerals between 0-9, and symbols # and * can be used for pass-
word.
word.
–
To correct a wrong entry, use [Del.].
–
Press [C] (clear) to clear the whole entry.
If a password is needed, press [Yes] and enter the password.
5
Press [OK].
–
To release the setting, press [OFF] or [Cancel].
The comm. setting screen will be restored.
6
Press [OK].
The fax screen will be restored.