Konica Minolta C450 用户手册
Utility mode
11
C450
11-17
11.4
Initial setting
Set the default of the fax function.
It is possible to set a fax function that is selected when the main power is
turned on or when [Reset] is pressed.
turned on or when [Reset] is pressed.
For this setting, display the fax screen and press the [Utility/Counter] on this
screen.
screen.
* Indicates factory default setting.
Initial setting
1
Open the user setting screen (See “Entering user setting” on
page 11-3).
page 11-3).
2
Press [Initial Setting].
–
Some items may not be displayed depending on the optional set-
tings.
tings.
–
In the utility mode, it is also possible to enter a number displayed in
the key through the keypad for selection. In the case of [Initial Set-
ting], enter 3 through the numeric keypad.
the key through the keypad for selection. In the case of [Initial Set-
ting], enter 3 through the numeric keypad.
Item
Description
Available value
Fax
[Current Setting]:
Before entering the utility mode, each of the
items that have been set on the touch panel is
registered as the default of fax function.
[Factory Default]:
Values set when shipped from the factory are
registered as the default of fax function.
Before entering the utility mode, each of the
items that have been set on the touch panel is
registered as the default of fax function.
[Factory Default]:
Values set when shipped from the factory are
registered as the default of fax function.
Current Setting
*
/ Factory
Default