Konica Minolta C450 用户手册
3
Transmission
3-32
C450
3.6
When unable to send
When unable to send
When you are unable to send a fax due to a line trouble or the like, a screen
to check the redial is displayed.
to check the redial is displayed.
1
Press [OK].
–
Redialing starts after the set time has elapsed.
–
In case that no transmission can still be made even when redialed,
a screen is displayed in which you can check that the job was not
successfully completed.
a screen is displayed in which you can check that the job was not
successfully completed.
2
Press [OK].
To delete a job of failed transmission, press the [Job List] and delete
that job.
that job.
!
Detail
When redialing as usual in the utility mode setting, no screen indicating
the redial is displayed.
the redial is displayed.
Redialing
Redialing refers to dialing the number of the same destination again.
If a facsimile cannot be sent due to a busy signal from the receiving machine
or for some other reason, the machine redials the number after a predeter-
mined amount of time has elapsed. During that interval before the number is
redialed, the transmission document is treated as a reserved document wait-
ing to be sent.
or for some other reason, the machine redials the number after a predeter-
mined amount of time has elapsed. During that interval before the number is
redialed, the transmission document is treated as a reserved document wait-
ing to be sent.
!
Detail
The redialing function is set at factory to redial one time after a three-
minute interval. The number of redials and the redialing interval can be
changed in the utility mode. For details, refer to “Telephone line settings”
on page 11-35.
minute interval. The number of redials and the redialing interval can be
changed in the utility mode. For details, refer to “Telephone line settings”
on page 11-35.