Konica Minolta 210 用户手册
When a message appears
8
bizhub 162/210
8-23
8.6
When copying is not performed correctly
Symptom
Possible cause
Remedy
Nothing appears in the dis-
play.
play.
Is only the [Start] key lit green?
The energy save mode is ena-
bled. Press any key on the
control panel to cancel energy
save mode. (p. 3-19)
bled. Press any key on the
control panel to cancel energy
save mode. (p. 3-19)
The “AUTO SHUT OFF” func-
tion was activated.
tion was activated.
Set the power switch to
o
The [Start] key indicator does
not light up green.
not light up green.
A user (section) access
number has not been entered.
number has not been entered.
Even though the [Start] key is
pressed, no copies are made.
pressed, no copies are made.
If the “Error” indicator on the
control panel is lit, an error has
occurred.
control panel is lit, an error has
occurred.
Follow the instructions in any
messages that appear on the
display.
messages that appear on the
display.
The machine has just been
turned on and is warming up.
turned on and is warming up.
It takes the machine less than
30 seconds to be ready to
make copies after it has been
turned on.
Please wait.
30 seconds to be ready to
make copies after it has been
turned on.
Please wait.
The machine cannot be set to
copy mode.
copy mode.
The machine is in Interrupt
mode (the Interrupt indicator
is lit).
mode (the Interrupt indicator
is lit).
The machine does not oper-
ate when it is turned on.
ate when it is turned on.
The power cord is left un-
plugged.
plugged.
Plug the power cord into the
power outlet.
power outlet.
The room’s circuit breaker is
open.
open.
Close the room’s circuit
breaker.
breaker.