Konica Minolta 210 用户手册
Before making copies
3
bizhub 162/210
3-41
3.11
Selecting the paper source
The paper used for making copies can be selected in two ways.
- Auto paper:
- Auto paper:
If the auto paper function is selected, the paper tray containing the most
suitable size of paper is selected based on the size of the document and
the specified zoom ratio.
suitable size of paper is selected based on the size of the document and
the specified zoom ratio.
- Manual paper selection:
The paper that you wish to use for copying can be selected.
To make copies using the auto paper function
1
Load the document in the document feeder.
For details, refer to “Loading the document” on page 4-10.
For details, refer to “Loading the document” on page 4-10.
2
Press the [Auto paper/Auto size] key
until the auto paper function is se-
lected.
until the auto paper function is se-
lected.
AUTO
appears in the bottom line of
the screen.
3
Specify the desired copy settings.
For details, refer to “Making a basic
copy” on page 4-3.
For details, refer to “Making a basic
copy” on page 4-3.
4
Using the 10-key pad, enter the number of copies to be made.
5
Press the [Start] key.
This will start the copy cycle.
2
Note
If
If
APS SIZE ERROR
appears in the display immediately after the [Start]
key is pressed, no tray is loaded with paper of the most suitable size. Ei-
ther load paper with the appropriate size, or press the [Paper] key and se-
lect the desired paper size, and then press the [Start] key again.
ther load paper with the appropriate size, or press the [Paper] key and se-
lect the desired paper size, and then press the [Start] key again.