Konica Minolta 160f 用户手册
When a message appears
8
bizhub 160f
8-29
LINE PROBLEM
CHECK LINE
The telephone dialing system
or telephone wiring system
are not set correctly.
or telephone wiring system
are not set correctly.
Check the telephone dialing
system or telephone wiring
system and use the appro-
priate Utility mode function
to make the correct settings.
system or telephone wiring
system and use the appro-
priate Utility mode function
to make the correct settings.
The telephone cable is not
attached correctly.
attached correctly.
Correctly connect the tele-
phone cable.
phone cable.
*COMM.ERROR*
(####)
(####)
Communication is not possi-
ble because of some prob-
lem in the machine.
ble because of some prob-
lem in the machine.
Check the transmission re-
sults.
sults.
Communication is not possi-
ble because of a problem
with the recipient/caller’s fax
machine.
ble because of a problem
with the recipient/caller’s fax
machine.
*REDIAL ALL FAILED*
All redial attempts failed be-
cause either the recipient’s
line is busy or there was no
answer.
cause either the recipient’s
line is busy or there was no
answer.
Check the condition of the
recipient’s line, and then try
sending the fax again.
recipient’s line, and then try
sending the fax again.
*MEM.FULL/TX CANCEL*
While sending a fax, the size
of the data for the scanned
image has exceeded the ca-
pacity of the memory.
of the data for the scanned
image has exceeded the ca-
pacity of the memory.
Retrieve all received faxes
stored in the memory.
stored in the memory.
Send the fax by direct trans-
mission.
mission.
*MEM.FULL/RX CANCEL*
While receiving a fax, the size
of the data for the received
image has exceeded the ca-
pacity of the memory.
of the data for the received
image has exceeded the ca-
pacity of the memory.
Retrieve all received faxes
stored in the memory.
stored in the memory.
FILE FULL/TX CANCEL
While sending a fax, the
maximum of number of man-
aged memory file is used.
maximum of number of man-
aged memory file is used.
Retrieve all received faxes
stored in the memory.
stored in the memory.
FILE FULL/RX CANCEL
While receiving a fax, the
maximum of number of man-
aged memory file is used.
maximum of number of man-
aged memory file is used.
Retrieve all received faxes
stored in the memory.
stored in the memory.
HANG UP THE PHONE
The receiver of the connect-
ed telephone is lifted.
ed telephone is lifted.
Replace the receiver of the
connected telephone on the
hook.
connected telephone on the
hook.
TEXT
×1.00
1
¦[A]§ #XXX: EMPTY
(While specifying copy set-
tings)
The selected paper tray has
run out of paper.
“#” indicates the paper tray,
and “XXX” indicates the pa-
per size.
tings)
The selected paper tray has
run out of paper.
“#” indicates the paper tray,
and “XXX” indicates the pa-
per size.
Either load paper of the
specified size into the speci-
fied paper tray, or press the
[Paper] key and select a dif-
ferent paper size.
specified size into the speci-
fied paper tray, or press the
[Paper] key and select a dif-
ferent paper size.
TEXT
×1.00
1
¦[A]§ #XXX: Fax Err
A fax error occurred while an
operation was being per-
formed in Copy mode.
operation was being per-
formed in Copy mode.
Press the [Fax] key to check
the error condition, and take
appropriate measures.
the error condition, and take
appropriate measures.
TEXT
×1.00
1
¦[A]§ #XXX: Comm.Err
A fax transmission error oc-
curred while an operation
was being performed in
Copy mode.
curred while an operation
was being performed in
Copy mode.
Press the [Fax] key to check
the error condition, and take
appropriate measures.
the error condition, and take
appropriate measures.
Message
Cause
Action
(Flashing alternately)