Konica Minolta 250/350 用户手册
LDAP, Lightweight Directory Access Protocol, is an Internet protocol that
Konica Minolta machines can use to look up E-Mail
Addresses from a server running Active Directory with LDAP Service
*
*Server 2008, LDAP is installed separately to Active Directory*
To set up LDAP on the Konica Minolta Bizhub machines, please follow the instructions
below:
NB: this is a guide only and is not indicative of actual settings for your
network or machine as the LDAP structure varies from Network to Network and
machine.
It is advisable for the Network Administrator to configure settings as a knowledge of
the Network is required.
C250, 252, C300, C351, C352, C450, BH420/BH500, BH600/BH750
Setting up via the Control Panel –
1) Press on Utility/Counter
2) Press on Administrator Setting and enter the Admin code of 12345678
3) Press on Network Setting
3) Press on Network Setting
4) Press on LDAP Setting
5) Press on ‘Enabling LDAP Function’ and select ‘ON’. Press ‘OK’
5) Press on ‘Enabling LDAP Function’ and select ‘ON’. Press ‘OK’
6) The machine will then take you out of Network Settings and you will have to follow
steps 3 & 4 again
7) Press on ‘Setting Up LDAP’ and the following screen will appear
7) Press on ‘Setting Up LDAP’ and the following screen will appear
8) Enter the IP address of the server where LDAP is configured
9) Enter in the ‘Search Base’ of the domain.