Konica Minolta 360 用户手册

Image Insert

When inserting an image into a finished set from a source such as a hard cover

book or 3D object like a wristwatch, the image insert mode functionality works

extremely well with these job requirements.

Place eight 8.5" x 11" originals face up into the RADF.

Have a hard cover book or magazine near by; for the images that are to be inserted.

You will be inserting the front cover after page 3 and the rear cover after page 5.

1. Application

Sheet/Cover/Chapter insert

2. Image insert

Index P… and press #3 on copier keypad

3. Index P… and press #5 on the copier keypad

Pressing #3 & #5 will sequentially position the inserts into the finished set.

4. Press start. The eight originals in the RADF will be scanned.

5. Place front of hard cover book onto platen glass

Start key

6. Place back of hard cover book onto platen glass

Start key

7. When scanning is complete

Finish

Start key

Combine Originals
Copying ID Badges/Insurance Cards/Drivers License (front & back)
onto the same side of an 8.5" x 11" sheet of paper

This is a major application with banks, insurance and mortgage companies.

For example; all residential mortgage applications must be accompanied be 2 different

ID’s usually a drivers license & social security card.

1. Combine originals

2. 4 in 1

Vertical

3. Basic

Zoom

x1.0

Paper

8.5" x 11" (portrait)

4. OK

5. Place top side of original (ID badge or drivers license) onto left side

of platen paper guide

Start Key

6. Turn original (ID badge or drivers license) over onto side two

Start key

7. When scanning is complete

Finish

Start key

bizhub 500/420/360

Copy

Job Shops