Konica Minolta A0HF012 用户手册

Scanning With the Machine

6-16

The search begins, and the search results appear after a while. If no data
matches the search keyword,

NOT FOUND

appears for about two sec-

onds.

For details on entering/editing text, refer to “Entering Text” on
page A-6.

Text starting with the first character of the maximum 10 characters
is searched for. Text will not be found if the search keyword is in
the middle of a word.

Press the + or , key to select the desired data, and then press the Select
key.

To narrow down the search results, press the Back key, and then
perform step 3 again.

Press the Select key again.
If an FTP address or an SMB address was selected, the destination
address is specified.

If an e-mail address was selected, press the + or , key to select

FIN-

ISH

, and then press the Select key.

To add an additional e-mail address, select

ADD

in step 6, and

then specify the destination. When sending the data to an FTP
address or SMB address, multiple addresses cannot be specified.
To check the specified e-mail address, select

CHECK

EDIT

step 6. To delete an address, select

CHECK

EDIT

in step 6, and

then continue with step 2 of “Deleting a Specified Destination
Address”.

Searching an LDAP Server

The destination e-mail address where the scan data is to be sent can be
specified by using information on the LDAP server.

To connect to an LDAP server, settings for

LDAP SETTING

must be

specified. For details, refer to the Reference Guide on the Documenta-
tion CD/DVD.

A maximum of 16 addresses (total of addresses from direct input and
an LDAP search) can be specified.

If anonymous access is used to search for information on an LDAP
server, the correct search results may not be retrieved.

With the main screen (Scan mode) or

Can Use AddressBook

dis-

played, press the AddressBook key four times so that

PHONE BOOK

appears.