Konica Minolta A0HF012 用户手册
Scanning With the Machine
6-21
4
Press the + or , key to select
CHECK
/
EDIT
, and then press the Select
key.
5
Press the + or , key to select the address to be deleted from the favorite
list, and then press the Stop/Reset key.
list, and then press the Stop/Reset key.
6
Press the + or , key to select
YES
, and then press Select key.
The selected address is deleted.
7
To delete another address, repeat the procedure from step 5.
8
To finish deleting addresses, press the Back key.
9
Press the + or , key to select
FINISH
, and then press the Select key.
Registering Speed Dial Destinations (Direct Input)
E-mail addresses can be registered as speed dial destinations. A maximum
of 250 speed dial destinations can be registered.
of 250 speed dial destinations can be registered.
"
Machine key operations cannot be used to register an FTP address or
SMB address as a speed dial destination. These addresses can be
registered with Local Setup Utility (LSU) or PageScope Web
Connection. For details, refer to the Reference Guide on the Docu-
mentation CD/DVD.
SMB address as a speed dial destination. These addresses can be
registered with Local Setup Utility (LSU) or PageScope Web
Connection. For details, refer to the Reference Guide on the Docu-
mentation CD/DVD.
"
Speed dial destination numbers 221 to 250 are reserved for register-
ing FTP addresses and SMB address from Local Setup Utility (LSU)
or PageScope Web Connection.
ing FTP addresses and SMB address from Local Setup Utility (LSU)
or PageScope Web Connection.
1
In the main screen (Scan mode), press the + or , key to select
UTIL-
ITY
, and then press the Select key.
2
Press the + or , key to select
DIAL REGISTER
, and then press the
Select key.
3
Press the + or , key to select
SPEED DIAL
, and then press the Select
key.
4
Use the keypad to type in the number (between 1 and 220) for the speed
dial destination, and then press the Select key.
dial destination, and then press the Select key.
5
Press the + or , key to select
MANUAL SETTING
, and then press the
Select key.
"
If an LDAP server is not specified, step 5 is skipped.
6
Use the keypad to type in the registration name, and then press the
Select key.
Select key.
"
For details on entering/editing text, refer to “Entering Text” on
page A-6.
page A-6.
"
A maximum of 20 characters can be entered.